Miniaturized Light Module with High Collimation
Introduction
Conventionally, it is difficult to collimate an LED beam. Using the fiber collimator with UV curing adhesive lens, this light module achieves a good collimation, and a more uniform power distribution. In the cases of miniaturized biomedical detection, a light source can be replaced with such module, enabling the realization of a micro total analysis system.
Technology
Comparison of collimation and light distribution
- Design and simulation of fiber collimator
- UV-curing optical adhesive micro-lens
- Measurement of LED performance
Specification
- Central wavelength: 405 nm, 455 nm, 460 nm, 470 nm, 505 nm, 530 nm, 590 nm, 617 nm, 625 nm, white (C.T. 3300 K, 5500 K)
- Spot size: 1 – 1.8 mm (typical)
- Module size: 5 cm × 10 cm × 4 cm (typical)
- Diverging angle: ~ 3° (typical)
- Power stability: drift < 1% within 2 hrs
- Multi-channel capability
Application
- Absorption or fluorescence detection in a biomedical system
- A light source of a transmission type spectrum analyzer or a monochromator
